Tin Ceilings by Ashton Clarke Pressed Metal Design

Call now: 647-282-8754
Ashton Clarke Pressed Metal Designs is a division of PGX Holdings Ltd.
How to antique a Tin Ceiling

Materials Required:
Pressed Metal Panels (Tin Ceiling)
Rags
Sponges
Primary paint colour (base coat)
Secondary paint colour (usually brown or darker colour)
Paint roller
Paint brush
Matte (flat) or Semi-gloss clear coat

Step 1.
Paint a base coat in desired colour. Ensure panels have been coated, therefore making them a
paintable surface. The best method is use a brush for the fine details of the panel and follow up with consecutive coats put on by a roller.
Step 2.
Once the base coat is dry, take a darker colour and paint over all the areas that are to look "antiqued". Ensure coverage in edges and around areas that have elevations.
Step 3.
Continue coverage of these areas, working quickly to ensure the paint does not dry completely.
Step 4.
Using the flat surface of a dry sponge, lightly brush over the highest elevations.
Step 5.
Take a dry rag and rub out the painted areas. Start by wiping in a circular motion over the flat areas. Allow the paint to rest in divots and around the edges of elevated areas. Wipe softly.
Step 6.
Analyze the panel to see if the amount of antiquing matches your taste. If it looks to clean (not antiqued enough) repeat steps 2-5.
Step 6-a.
Here is an example of touching up the panel to ensure it has the right level of contrast. The paint is being focused on main elevation points. The panel is then wiped, using the methods listed above.
Step 7.
Allow panel to dry completely and spray with a final clear coat to ensure its longevity.

Here is an example of a final panel, antiqued to the specifications of a clients request.

If you have an questions about this technique or would like more information on painting your pressed metal (tin ceiling), free information is always available by contacting Ashton Clarke Pressed Metal Designs at 519-925-6627 or by visiting www.ashtonclarke.ca